Selecting Filter Factor Number; Deselecting Filter - Sekonic LITEMASTER PRO L-478 Series Operating Manual

6-5-2. Selecting Filter Factor Number

Up to four filters can be used as a pack with the
exposure display compensated for all.
Select the necessary filter name only which will be
used in the measurement.
1) Setting Amount of Filter Compensation
1. Touch the Tool Box icon
Measuring screen to open the Tool Box screen.
2. Touch the [Filter Compensation] to display the
Filter Compensation Setting screen.
3. T ouch the radio button of [Filter pack in use]
to display the Select (Filter Pack in Use) screen.
If no filters Names are present, touch one of
the buttons marked 1, 2, 3, 4 to view a list of
industry standard filter names.
4. T ouch a Filter Name to enter it and return to the
(Filter Pack in Use) screen.
5. I f the filter you want is not immediately visible,
move your finger over the Slide or touch the
UP/DOWN arrows ▲/▼ to view additional filter
names. Touch a Filter Name to enter it and
return to the Filter Pack in Use screen.
6. R epeat pressing a numbered button and
entering a Filter Name until you have created
the filter pack you want. When finished, touch
the [Close] to return to the Filter Compensation
Setting Screen.
7. A numbered list of the filters you selected will
appear on the screen. The radio button will
also show that this filter selection will be in use
when a measurement is made.
8. Touch the [OK] to return to the Measurement Screen
to start metering with the filter pack you created.
•
S ee "8. Registered Filters (See P62)" for details about preset
filters registered in the default setting, and "6-6-7.Filter Name
Editing (See P56 )" for details about customized preset filters.

6-5-3. Deselecting Filter

1. T ouch the Tool Box icon
of the Measuring screen to open the Tool Box
screen.
2. Touch the [Filter Compensation] to display
the Filter Compensation Setting screen.
3. T ouch the radio button of [No Filter] in the
displayed Filter Compensation Setting screen
to deselect the filter in use.
4. Touch the [OK] to return to the Measuring
screen for normal metering with no
compensation.
at the bottom of the
at the bottom
48
Tool Box Screen
Filter Compensation Setting Screen
Filter pack in use
Filter Compensation
Setting Screen
Filter
factor
numbers