Safety Guide And Maintenance - Sekonic LITEMASTER PRO L-478 Series Operating Manual

Find Quality Products Online at:
10

Safety Guide and Maintenance

•
To avoid damaging this meter, never drop it or subject it to shock.
•
Avoid using it in water spray or rain as doing so may cause damage.
•
Avoid storing it in high-temperature and/or humid locations as doing so may cause damage.
•
Beware of condensation caused by sudden temperature change, as such condensation may cause dam-
age or malfunction.
•
Do not place the meter in direct sunlight during midsummer or near heaters, etc., as the temperature of the
meter will rise beyond that of the air temperature. Be careful when using the meter in hot locations.
•
Although the LCD monitor is manufactured with very high precision technology with over 99.9% effective
pixels, there might be a few dead pixels. Dead pixels, that do not or always light up, are not a malfunction.
Maintenance Notes
•
If your meter is splashed with water, wipe immediately with a soft dry cloth. Leaving the meter wet may
cause rust or corrosion.
•
Keep the light receptor head clean and free from dust,/dirt and avoid scratching as accuracy may be
affected.
•
When light meter gets dirty, clean it with soft dry cloth. Never use organic cleaners (like thinner or
benzene).
•
Refer servicing only to qualified and authorized personnel in case of product's malfunction.
•
Contact your local camera store or retail organization for warranty and service.
GlobalTestSupply
www.
66
.com
sales@GlobalTestSupply.com