Light Meter Operating Manual LITEMASTER PRO L-478DR L-478DR-A L-478DR-U This manual is speci c for PocketWizard operation. Please read the operating manual and safety precaution carefully to fully understand the features of this product before use and keep it for future use. Keep the operating manual in a safe place.
Table of Contents 1 About PocketWizard Wireless Technology ........3 1-1. How to use L-478DR Series with PocketWizard Wireless Technology .................. 3 1-2. Turning the Power ON ..............4 1-3. Setting Radio Flash Mode in Custom Setting ......5 2 Measuring ..................... 6 2-1.
CE version, and three zones (A, B, C) allowing control of three separate flashes on each channel. <Radio Frequency> To comply with local broadcast regulations, Sekonic wireless systems sold in the various markets around the world are designed to operate at different frequencies. Sekonic meters have built-in transmitting antennas that are specifically tuned for their market area.
1-2. Turning the Power ON Press and hold the Power button for about 1 second to start up the meter. The startup screen will be displayed, followed by the Measuring screen. Startup screen for L-478DR Series (PocketWizard) Measuring screen Power button...
1-3. Setting Radio Flash Mode in Custom Setting Make sure “6) Flash Mode” is switched ON and “c) Radio Mode” is switched ON, and select “c-i) Radio System Preference”, either Standard and/or ControlTL. 1) Press the Menu button on the meter to open the Menu screen. 2) Touch [3.
Measuring 2-1. Selecting the Channel and Zones 2-1-1. How to set in Standard System 1) Touch the Tool Box icon ( ) at the bottom right of the Measuring screen to display the Tool Box screen. 2) Touch the [Radio CH/Zone] to display the Radio CH/Zone Setting screen. 3) Touch the STD tab for Standard Channel and Zones selection.
2-1-2. How to set in ControlTL System 1) Touch the Tool Box icon ( ) at the bottom of the bottom right of the Measuring screen to display the Tool Box screen. Then touch [Radio CH/Zone] to display the Radio CH/Zone Setting screen. 2) Touch the [Radio CH/Zone] to display the Radio CH/Zone Setting screen.
2-2. Measuring in Radio Flash Mode 2-2-1. How to use Radio Triggering 1) Touch the Measuring Mode icon ( ) at the top left of the Measuring screen and then select the Radio Flash Mode ( Measuring screen Measuring Mode Selection screen Measuring screen Measuring screen 2) Set ISO sensitivity on the ISO icon.
2-2-2. How to use Flash Power Control Measuring screen Power Control function is available with ControlTL system only. Make sure that plug-in external or built-in PocketWizard receivers and flash unites are compatible with the function of flash power control. 1) Touch the Measuring mode icon at the top left of the Measuring screen and then select the Radio Flash Mode 2) Touch the Power Control icon ( ) on the Measuring...
2-3. Measuring in Radio Multiple (Cumulative) Flash Mode 1) Touch the Measuring mode icon ( ) at the top left of the Measuring screen and then select the Radio Multiple (Cumulative) Flash Mode ( Measuring screen Measuring Mode Selection screen Measuring screen 2) Set ISO sensitivity on the ISO icon.
Functions 3-1. Custom Setting Function This enables quick and easy setup of individual meter preference. For other Custom Setting, please refer to the L-478 Series Common Operating Manual. Custom Setting specific to L-478DR Series for PocketWizard is as follows. 3-1-1. Custom Setting Function List Setting No.
FCC & IC compliance information • C hanges or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant. To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.