Sekonic LITEMASTER PRO L-478 Series Operating Manual page 19

Find Quality Products Online at:
2) Setting Icons
Setting icons type and value will change with the Measuring mode in use. Touch or
slide finger up/down over the icons to change the value.
Explanation of value types
•
T : Shutter speed
Shutter speed is displayed in the following way.
30m (30 minutes), 8s (8 seconds), 125 (1/125 of a second)
•
ISO : ISO sensitivity
•
F : f-stop (aperture)
•
ANG : Shutter angle
•
f/s : Frames per second (Cine frame rate)
Operating Set Icon:
Value increases when up arrow (▲) is touched.
Value decreases when down arrow (▼) is touched.
Slide the icon number up or down with your fingertip to increase or decrease the
reading.
3) Measuring unit/Displayed value field
This displays information such as measured values and measuring units.
Measuring value unit: T (shutter speed), F (f-stop), ISO (ISO sensitivity)
Measuring values
Additional info for measuring value
Example: 1,900,000lx
Measuring value unit: F (f-stop)
Flash component
• The ratio of flash light to the total exposure is displayed as a
percentage (in 10% steps)
GlobalTestSupply
www.
T priority mode F priority mode
HD CINE mode
CINE mode
Measuring mode information
display
•lx:
•fc:
•cd/m
2:
•fl:
Measuring value
19
.com
TF priority mode
Ambient light illuminance
lx independent display
Ambient light illuminance
fc independent display
Ambient light luminance
cd/m independent
2
display
Ambient light luminance
fl independent display
sales@GlobalTestSupply.com