Configure The Fbxi For Bacnet® Communications - ABB Cylon FBXi Series User Manual

CONFIGURE THE FBXi FOR BACNET® COMMUNICATIONS
The FBXi can act as an
In order for this to happen, the port must be configured for
page in the FBXi's web UI:
and, if necessary, on the
Set the in the
Device ID
is the BACnet
Note:
Device ID
BACnet instance number to ensure proper communications. This
even across subnets. By default, it is set is set to the entire numeric portion of the controller's serial number.
©ABB 2023 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
MS/TP router, passing BACnet
>
IP Network TCP/UDP Ports
> page, and optionally set a
BACnet Device
device instance number. Every
FBXi Series |
comms to devices that are attached to its serial port.
MS/TP Comms using the
page:
:
Device Name
BACnet controller within the site must receive a unique
BACnet instance number should be unique
Installation
>
RS 485 Port Configuration
47