ABB Cylon FBXi Series User Manual page 53

Slide the other RMC connector into the Left-Hand T-slot of the remote FLX.
Insert the second interconnect
Note The termination block can only be used on the right-hand interlink connector of the last
bus.
While it is possible, in a multi-tier system, to connect intermediate tiers from right to left to ease
installation, the final tier must be wired from left to right so that the
connector of the last
©ABB 2023 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
FLX on the bus
Installation
FBXi Series |
FLX unit on the
FLX bus can be terminated on the RHS
FLX
53