Filling The Water Tank - BORETTI MLBS45 User Manual

15. Filling the water tank

15.1 Opening the front panel
* Press the key for a few seconds.
* The front panel slightly opens (≈15º). This process is slow.
* Complete the panel opening manually.
Note:
The panel can be opened during the oven operation.
15.2 Filling the water tank
All functions require the water tank to be full.
Fill the water tank up to the "MAX" mark with
cold, fresh drinking water and introduce it
into the slot located behind the front panel
(maximum 0,8L).
Note:
Do not use sterilized or distilled water for cooking with the steam oven.
The minerals in the water are essential for the cooking process to work.
Note:
When filling the water tank, the top section of the tank does NOT fully
seal. Overfilling the tank will potentially cause the tank to leak when
moved.
15.3 Refilling the water
The contents of the water tank normally
suffice for one cooking session of 50-60
minutes.
If, however, the water tank needs to be
refilled, the Water refill message shows.
Only fill the water tank up to a maximum
of 0,5l to ensure that the water does not
overflow when it is pumped back to the water tank. RISK OF OVERFLOW.
24