Descaling Procedure - BORETTI MLBS45 User Manual

14. Descaling procedure

1. Rotate the left knob to enter the "General Settings" menu.
2. Rotate the right knob until the descale symbol appears on the right side of
the display.
3. Press the to start the descaling function.
4. The display shows the following message
5. Remove the water tank. Pour 0.5 liters ofan adequate descaling solution
into the water tank and put the water tank back.
6. Press . The Descale cycle is initiated and takes about 30 minutes.
7. The descaling process is silent and during this process, the display shows
the percentage of the process.
8. The display shows the message
9. Fill the water tank with 0,8 liters of fresh water and put the water tank back.
10. Close the panel The first rinsing cycle starts.
11. When the display shows the previous message again
emits a new beep, remove and empty the water tank.
12. Fill the water tank with 0.8l of cold waterand put the water tank back.
13. Close the panel. The second rinsing cycle starts.
14. When the rinsing cycle has finished the display shows the following
message and emits a beep, until the water tank is removed.
15. Remove, empty and dry the water tank.
and the oven emits a beep.
22
and the oven