Charging The Battery - Honeywell RAELink3 2.4GHz User Manual

RAELink3 2.4GHz User's Guide

6 Charging The Battery

It is recommended to fully charge the battery before using the
RAELink3 2.4GHz. The Li-ion battery is charged by attaching
the instrument to the Charging Adapter.
Follow this procedure to charge the instrument:
1. Align the Charging Adapter with the back of the RAELink3
2.4GHz (two guides match indents on the back of the
Charging Adapter.
2. Slide the Charging Adapter onto the back of the RAELink3
2.4GHz.
3. Make sure the latch clicks into place.
4. Plug the power supply's barrel connector into the input on
the side of the Charging Adapter.
5. Plug the power supply into the wall outlet.
The LED Charging Indicator in the Charging
Adapter should glow red to indicate it is charging,
and glow green when the battery is fully charged.
Charging
Indicator
15