Setting The Network Id - Honeywell RAELink3 2.4GHz User Manual

RAELink3 2.4GHz User's Guide
It shows the last Bluetooth pairing ID and asks if you want to
search for a connection. (If no connection was recorded, then
"Null" is shown.)
Note: When Programming Mode is accessed, the icons are
minimized and relocated to the top of the display.
If you want to search for a Bluetooth-equipped monitor and pair
with it, press [Y/+]. If not, press [N/-] to move to the next
screen. If you want to exit Programming Mode, press [MODE].

13.2 Setting The Network ID

Every AreaRAE network must have a Network ID, which
identifies that network and all equipment operating in that
network. All RAELink3 2.4GHz (or other RAELink model) Host,
Repeater, and Remote wireless modems in the same AreaRAE
network need to be configured with the same Network ID.
RAELink3 2.4GHz modems come from the factory programmed
to a unique random network ID, or programmed to match an
existing system as specified by the customer. To enable a
different Network ID, the number must be set to a value
between 1 and 4095, except 255.
When changing the Network ID, the cursor flashes on the selected
digit, highlighting it and indicating that you can change it:
Network ID: 0001
0001
1. Press [Y/+] to increase the number or [N/-] to decrease
the number.
2. Press [MODE] to advance to the next digit.
3. Input a network ID (except 255).
26