Turning The Raelink3 2.4Ghz Off; Configuring The Raelink3 2.4Ghz; Accessing Programming Mode - Honeywell RAELink3 2.4GHz User Manual

Table of Contents

RAELink3 2.4GHz User's Guide

12 Turning The RAELink3 2.4GHz Off

1. Press and hold the Mode key for 3 seconds. The

display shows "Shutting Down..." and a 5-second

countdown to shutoff begins.

2. When you see "Unit off..." release your finger from the

[MODE] key. The instrument is now off.

Note: You must hold your finger on the key for the entire

shutoff process. If you remove your finger from the key during

the countdown, the shutoff operation is canceled and the

instrument continues normal operation.

The RAELink3 2.4GHz modem is a programmable "smart"

modem that can be configured to operate in Host, Repeater, or

Remote Modes. These options are selected in Programming

Mode, along with other parameters for setting the Network ID,

Unit ID, GPS on/off state, GPS coordinates check, Modem

menu and Op Mode, BT, Cable, and BT Power on/off. All

configurations are performed using the three front-panel keys

and the display.

Note: You can exit Programming Mode at any time by pressing

[MODE], except when in the Set Network ID and Set Unit ID

menu screens.

With the RAELink3 2.4GHz turned on, press and hold both

[MODE] and

[N/-] for 3 seconds. The RAELink3 2.4GHz enters programming

mode. The Bluetooth communication screen is displayed:

Start BT Search?

* (1) 596-000123

(2) Null

Table of Contents