Table of Contents
Advertisement
General information
1.9
Technical Safety Checks (TSC)
Abbreviation: TSC = Technical Safety Checks
NOTE
Test certificate for
'Technical safety checks'
1 Identification data
2 General checks
2.1 Visual inspection: Is there any damage
affecting safety?
2.2 Are all cables and cable guides secure
and without any visible damage?
2.3 Are undamaged accessories being
used?
2.4 Radiation protection equipment for
the devices present and not damaged?
(no radiation protection of the building)
Tab. 1
Siemens AG
Medical Solutions
Within the purview of DIN VDE 0751-1, the operator of medical
engineering products has to perform technical safety checks at
regular intervals.
The checks listed in these maintenance instructions include all
technical safety checks required by DIN VDE 0751-1.
A separate report with print number SP00.000.834.01... is avail-
able for each technical safety check.
Within the purview of DIN VDE 0751-1, we recommend document-
ing the maintenance results both in the maintenance report and
in the TSC report. The reports should be filled out completely and
handed over to the client after maintenance is complete.
The table below assigns each technical safety check listed in
document SP00.000.834.01... to the corresponding maintenance
work.
RXR8-120.101.01
Rev. 05
Maintenance instructions,
Test/Comments
Please fill in the fields.
n.a.
2.1.1 Check the system for damage;
checks:
SIM Covers
SIM switch box/control console
SIM Release cable
SIM Power and primary cable
2.1.1 Check the system for damage;
checks:
SIM Release cable
SIM Power and primary cable
n.a.
2.9 Radiation; tests:
SIE Radiation indicator
SIE Acoustic signal
Page 11 of 14
07.05
CS PS 24
1 - 11
Polymobil 10
Advertisement
Table of Contents
