Technical Safety Checks (Tsc) - Siemens POLYMOBIL Plus Maintenance Instruction

18
1.9

Technical Safety Checks (TSC)

Abbreviation: TSC = Technical Safety Checks
NOTE
Test certificate "Technical safety
checks"
1 Information for identification
2 General tests
2.1 Visual check: No damages affecting
safety?
2.2 Cables and cable guides safe and
without visible damage?
2.3 Used accessories without damage?
2.4 Radiation protection equipment avail-
able and without damage? (no structural
radiation protection)
POLYMOBIL Plus
Within the scope of DIN VDE 0751-1, the operator of medical-tech-
nical products is required to carry out technical safety checks at
regular intervals.
The tests listed in these maintenance instructions include all tech-
nical safety checks required according to DIN VDE 0751-1.
For the technical safety checks, a separate report is available with
the print number SP00-000.834.01....
Within the scope of DIN VDE 0751-1, we recommend documenting
the results of maintenance in the maintenance protocol as well as
the TSC protocol, completing it and handing it over to the custom-
er.
The following table allocates the corresponding maintenance pro-
cedures to each technical safety check which is documented in the
document SP00-000.834.01....
SPR8-125.831.01.02.02
05.05
Maintenance instructions, test / remarks
Please complete fields.
n.a.
2.1.1 Checks for signs of damage, tests:
SIM Covers
SIM Control box / control console
SIM Exposure release cable
SIM Power and primary cables
2.1.1 Checks for signs of damage, tests:
SIM Exposure release cable
SIM Power and primary cables
2.1.1 Checks for signs of damage, test:
SIM DAP measuring system (optional)
2.9 Radiation, tests:
SIE Radiation indicator
SIE Acoustic signal
Page 18 of 40
CS PS 24
General
Siemens AG
Medical Solutions