Setting Up the P-touch Labelling Machine
Turning Power On/Off
On: Press the
(Power) button to turn the machine on. The
Off: Press and hold the
in orange until the power is off.
Important
When turning the machine off, do NOT remove the battery or disconnect the AC adapter until the orange
(Power) indicator turns off.
Feeding Tape
Important
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
• Do not pull the label when the machine is ejecting it from the tape exit slot. Doing so will cause the
ink ribbon to be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
Feed and Cut
The Feed and Cut function feeds approximately 22.3 mm of blank tape, and then cuts the tape.
Press the
(Feed&Cut) button.
(Power) button again to turn the machine off. The
(Power) indicator lights in green.
(Power) indicator may light
1
1
1
1
7