Connecting The Ac Power Cord; Turning Power On/Off; Led Indicators - Brother QL-800 Quick Setup Manual

4. Connecting the AC Power Cord

Connect the AC Power Cord to the printer. Then, plug the AC Power Cord into an
earthed electrical socket.

5. Turning Power On/Off

On: Press the Power ( ) Button to turn the printer On. The Status LED turns green.
Off: Press and hold the Power ( ) Button again to turn the printer Off.
IMPORTANT
When turning the printer Off, do not disconnect the AC Power Cord until the orange
Status LED turns Off.

6. LED Indicators

The indicators light and flash to indicate the printer status.
Status LED
Not lit Power Off
Steady green light Power On
Feeding mode
Printing mode
Cutting mode
Cleaning mode
Flashing green light If the green light flashes at 0.5 second intervals, one of the following has
occurred:
• Print preparation mode
• Canceling job
• Receiving data from the computer
• Transferring data
Steady orange light The DK Roll Compartment Cover is open. Close the DK Roll Compartment
Cover correctly.
Label resetting mode is on or the Cutter Button was pressed while resetting.
For more information on resetting the printer, see the User's Guide.
Flashing orange light If the orange light flashes at 0.5 second intervals:
Cooling mode
Steady red light Boot mode
Flashing red light If the red light flashes at 1 second intervals, one of the following errors has
occurred:
• End of DK Roll
• Feed error
• The DK Roll Compartment Cover was opened while the Label Printer was in use
If the red light flashes rapidly *, there is a system error.
If the red light flashes at one second off, rapidly * on, rapidly * off, rapidly * on,
one of the following errors has occurred:
• Cutter error
* "Rapidly" means 0.3 second intervals.
Condition