Using The Rechargeable Li-Ion Battery/Battery Base (Optional:pa-Bt-4000Li/Pa-Bb-002); Installing The Rechargeable Li-Ion Battery - Brother P950NW User Manual

Using the Rechargeable Li-ion
23
Battery/Battery Base
(Optional:PA-BT-4000LI/PA-BB-002)
This P-touch labelling machine can be powered by the AC adapter (included) or the rechargeable Li-ion
battery (optional: PA-BT-4000LI). Use the power source appropriate for your intended use.
With the rechargeable Li-ion battery installed, you can use the machine in locations that do not have AC
power.
The battery is recharged by the AC adapter when the battery and the battery base are attached to the
machine.

Installing the Rechargeable Li-ion Battery

a
Disconnect the AC adapter and then attach the battery base (optional: PA-BB-002) onto the machine.
For more information about attaching the battery base, see its instruction manual.
b
Open the battery cover on the bottom of the machine.
c
Insert the battery into the battery compartment.
d
Close the battery cover.
Note
The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate
depending on the voltage.
23
23
23
188