Creating A One-Touch Panel - Brother P950NW User Manual

Using the Touch Panel Display (Optional:PA-TDU-003) (P950NW Only)
 If [Database] was set, starting with database number 1, the databases of the selected template are
registered with the one-touch key of the same number. (The illustration shows when template number 1
is selected.)
a
Press [ ] (admin key).
b
Select [Setup], and then press [OK].
c
Select [Keys Function], and then press [OK].
d
Press [a] or [b], select [Template] or [Database], and then press [OK].

Creating a One-Touch Panel

To create a one-touch panel, use one of the following methods:
 Using stickers or in handwriting, note the names of keys directly on the included one-touch panel.
 The actual panel figure can be found on the last page before the back cover in Quick Setup Guide of Touch
Panel Dislay. This figure can be used by copying it onto plain paper.
Panel size: 132.4 mm (length) x 92.3 mm (width)
 A panel format can be downloaded from the Brother support website at support.brother.com
[Select your region/country.] - [Downloads] - [Choose your product]
This can be used by typing in the key names, then printing out the data on plain paper.
Floor 1 Floor 1 Floor 2
A0-001 A0-002 D0-011
Floor 2
D0-014
24
24
215