Table of Contents
Advertisement
Setting Up the P-touch Labeling System
• Make sure that there is no slack in the tape. Otherwise the tape may catch on the protrusion (2) and
become bent or wrinkled, causing the tape to jam. To fix the slack in the tape, refer to the illustration in
step a and pull the tape outside of the tape guide.
• When removing the tape cassette, make sure that the tape does not catch on the protrusion (2).
d
Close the top cover.
Important
Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high humidity,
or dusty locations. After opening the sealed package, use the tape cassette as quickly as possible.
Turning Power On/Off
On: Press the
(Power) button to turn on the P-touch labeling system. The
green.
Note
When the P-touch labeling system is turned on for the first time, the language selection screen appears.
Select the language you want using the
Setting Language and Unit on page 193.)
Off: Press and hold the
indicator may light in orange until the power is off.
Important
When turning off the P-touch labeling system, do NOT remove the battery or disconnect the AC adapter
until the
(Power) indicator turns off.
2
or
key. The language setting can also be changed later. (See
(Power) button again to turn off the P-touch labeling system. The
(Power) indicator lights in
(Power)
1
1
7
Advertisement
Table of Contents
