Shielding Gas Recommendation - ESAB Warrior 750i CC/CV Instruction Manual

6 SHIELDING GAS RECOMMENDATION

6 SHIELDING GAS RECOMMENDATION
Welding Shielding Gas Material
MAG Mix Ar/CO
MAG Mix Ar/CO
MIG 100% Ar
FCAW Mix Ar/CO
FCAW 100% CO
FCAW Mix Ar/CO
FCAW 100% CO
TIG DC 100% Ar
TIG DC 100% Ar
TIG DC 100% Ar
TIG AC 100% Ar
A general rule to be followed for shielding gas flow rate is 10 to 12 times of wire size. It may
increase for different welding applications where higher stick out and parameters are used.
When using Helium mixtures, the flow rate must be 1.5 to 3 times more than with argon.
0463 730 231
Carbon steel
2
Stainless steel
2
Aluminium
Carbon steel
2
Carbon steel
2
Stainless steel
2
Stainless steel
2
Carbon steel
Stainless steel
Stainless steel
Aluminium
Recommended Flow Rate (l/min)
Wire Ø × 10
Wire Ø × 10
Wire Ø × 12
Wire Ø × 12
Wire Ø × 12
Wire Ø × 12
Wire Ø × 12
Cup size or nozzle number × 1.2
Cup size or nozzle number × 1.2
Cup size or nozzle number × 1.2
Cup size or nozzle number × 1.2
- 21 - © ESAB AB 2022