Internal Speaker; Removing The Speaker; Installing The Speaker - Dell OptiPlex Small Form Factor 7010 Owner's Manual

Hide thumbs Also See for OptiPlex Small Form Factor 7010:
Table of Contents

Advertisement

3. Install the
2.5-inch hard drive
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in

Internal speaker

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following image indicates the location of the speaker and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Press the tab, lift and slide the speaker along with the cable from the slot on the chassis.

Installing the speaker

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
if applicable.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D17s

Table of Contents