Expansion card
Removing the graphics card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
6. Remove the
disk-drive
About this task
The following image indicates the location of the graphics card and provides a visual representation of the removal procedure.
Steps
1. Push the securing tab on the graphics-card support bracket and rotate the bracket to move it away from the chassis.
Before working inside your
if applicable.
if applicable.
cage.
computer.
Removing and installing Customer Replaceable Units (CRUs)
63
Need help?
Do you have a question about the OptiPlex Small Form Factor 7010 and is the answer not in the manual?
Questions and answers