Table of Contents
Advertisement
Quick Links
SOLDERING TESTER
FG-101B
Instruction Manual
Thank you for purchasing the HAKKO FG-101B Soldering tester.
This product is a soldering iron tester capable of measuring soldering tip
temperature, leak voltage and ground resistance.
Please read the manual carefully
before operating the HAKKO FG-101B.
Please keep this manual readily accessible for reference.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hakko Electronics FG101B-03
Summary of Contents for Hakko Electronics FG101B-03
- Page 1 SOLDERING TESTER FG-101B Instruction Manual Thank you for purchasing the HAKKO FG-101B Soldering tester. This product is a soldering iron tester capable of measuring soldering tip temperature, leak voltage and ground resistance. Please read the manual carefully before operating the HAKKO FG-101B. Please keep this manual readily accessible for reference.
-
Page 2: Table Of Contents
Table of Contents PACKING LIST AND PART NAMES ..................1 SPECIFICATIONS ........................2 WARNINGS, CAUTIONS AND NOTES ..................3 OPERATION ..........................4 Initial setup ............................4 Measurement of tip temperature ......................5 Measurement of leak voltage ......................6 4-4 Measurement of resistance difference between tip and ground wire ..........7 Explanation about various functions ....................7 MAINTENANCE .........................9 REPLACEMENT PARTS/OPTIONS ..................10... -
Page 3: Packing List And Part Names
1. PACKING LIST AND PART NAMES Please check that all items listed below are included in the package. HAKKO FG-101B ..........1 Ground clip ............1 Fuse..............1 Power cord ............1 Conductive wire ..........1 Instruction manual ...........1 Sensor (qty 10) ..........1 AUTO ZERO button Blind plate Fuse Sensor... -
Page 4: Specifications
2. SPECIFICATIONS Model name HAKKO FG-101B 1˚C Temperature Resolution 1°F 0 - 700˚C Measurement range 32 - 1300°F Measurement ±3˚C (between 300 and 600˚C) ±6°F (between 572 and 1112°F) ±5˚C (other than above) tolerance ±10°F (other than above) Sensor K(CA) thermocouple Voltage Resolution 0.1mV... -
Page 5: Warnings, Cautions And Notes
3. WARNINGS, CAUTIONS AND NOTES In this manual, items requiring caution are classified into 2 categories, "WARNINGS" and "CAUTIONS", as defined below. Please make sure to understand these items before reading the main text. WARNING : Failure to comply with a WARNING may result in serious injury or death. CAUTION Failure to comply with a CAUTION may result in injury to the operator, or damage to the objects involved. -
Page 6: Operation
4. OPERATION Initial setup Attach the included sensor. Slide pin Slide button Slide the slide button. The slide pin will move toward the terminal. Conductive plate Attach the sensor with the slide pin Terminal moved toward the terminal. CAUTION Attach the sensor having a red mark Since the sensor is made of ultra- to the red-colored terminal and the thin (Ø0.2) K thermocouple, pressing... -
Page 7: Measurement Of Tip Temperature
Measurement of tip temperature Press the SELECT button to set the mode to "TEMP". New solder Measurement Apply a new coat of solder on point the tip and touch it on the sensor measurement part (See the figures at right.) NOTE: When measuring, apply a new coat of solder on the tip. -
Page 8: Measurement Of Leak Voltage
4. OPERATION(continued) Measurement of leak voltage CAUTION • Before measuring the voltage or resistance, be sure to connect the main body power cord to a two-pole grounded-type receptacle. • If values exceeding specified ones are displayed as results for voltage or resistance, check the tip and attaching screws of the soldering iron for looseness and take another measurement. -
Page 9: Measurement Of Resistance Difference Between Tip And Ground Wire
Measurement of resistance difference between tip and ground wire Plug the power plug of the soldering iron to be measured into the power receptacle the HAKKO FG-101B main body. Wait until the tip reaches the set temperature. If the soldering iron temperature is variable, set temperature to maximum. - Page 10 4. OPERATION(continued) ■ AUTO ZERO function AUTO ZERO function is necessary for measureing voltage (mV) and resistance (OHM). button displays "counting": 0.0.0 → 0.0 → 0. Pressing the Wait until the normal display appears. Correction values from AUTO ZERO are recorded in the main body. Even after the power is turned off, the correction values are still available in later measurement sessions.
-
Page 11: Maintenance
■ Data communication function (DATA I/O) Connecting an exclusive cable adaptor module (option) to the DATA I/O connector on the upper part of the HAKKO FG-101B enables communication to applicable stations such as the HAKKO FN-1010, etc. (See the figure below) Data communication by infrared will be disabled during communication by DATA I/O. -
Page 12: Replacement Parts/Options
6. REPLACEMENT PARTS/OPTIONS ● HAKKO FG-101B Specifications Item No. Part name B2419 Power cord/3 core & American plug 120V USA B2421 Power cord/3 cored wire with no plug B2422 Power cord/3 core & BS plug India B2424 Power cord/3 core & European plug 220V KC 230V CE B2425 Power cord/3 core &...
Need help?
Do you have a question about the FG101B-03 and is the answer not in the manual?
Questions and answers