Advertisement
CLX3300
Cylindrical Lockset
Installation Instructions
Miscellaneous Options
12
b
Lever to Accept Schlage
Provided less core. Tailpiece included (See Figure 21).
1. If needed, rotate clip to leave appropriate slot on tailpiece open
for locking pin.
2. Remove key from core.
3. Unscrew threaded cap from end of core (it will be necessary to
depress the locking pin).
4. Place tailpiece inside the exposed end of core with locking pin
in open slot.
5. Reverse step 3 to reinstall cap.
6. Install core in lock normally.
See FM207 for more details.
c
Lever to Accept Schlage
1. Provided less cylinder.
2. Depress cap pin and unscrew end cap to remove
tailpiece from competitor's cylinder.
3. Insert new tailpiece in orientation shown.
4. Re-aassemble end cap over new tailpiece.
d
Lever to Accept Yale
1. Provided less cylinder
2. Slide provided spacer over tailpiece
3. Insert driver assembly into back of core.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com •www.corbinrusswin.com
Copyright © 2021, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
®
LFIC (M69)
®
or Yale
®
Fixed Core Cylinder (M06 or YC Option)
Competitor's
Cylinder
®
LFIC (YRC Option)
Figure 21
Cap Pin
End Cap
7
FM566-EN 6/22
Advertisement
