Advertisement
CLX3300
Cylindrical Lockset
Installation Instructions
Other Function Instructions
11
a
Remove Outside Lever for Exit Latch (CLX3340NT)
1. Remove inside lever. (See Section 9).
2. Remove rose.
3. Remove (2) mounting screws and inside housing assembly.
4. Remove outside trim assembly.
5. Push and hold plug back (located inside of outside trim assembly). See Figure 17.
6. Push lever catch with lever release tool and remove lever.
Inside Housing Assembly
Lever
b
Install Half Dummy (CLX3350)
Screws (2) #12 - 24 x 1-1/2"
Cup Washer
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com •www.corbinrusswin.com
Copyright © 2021, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
(2) Mounting Screw
Outside Trim
Assembly
Trim Assembly
Figure 18
5
Push
Push and
Hold Plug
Figure 17
FM566-EN 6/22
Advertisement
