Ion 1200-S Leds - PaloAlto Networks ION 1200-S Hardware Reference Manual

ION 1200-S Overview

ION 1200-S LEDs

Refer to the ION 1200-S device front panel images for position of the LEDs on the ION 1200-S
devices and its description.
LEDs
Power
Operating System Status
Controller
Link Activity
Link Speed
The following table describes the cellular LED.
Cellular LED
Cellular
ION 1200-S Hardware Reference
ION 1200-S
• Green LED indicates the device is powered on.
• Red LED indicates that the device is not getting enough
power.
• Green LED indicates OS is running.
• Red LED indicates secure boot has failed.
• Green LED indicates that the device is connected to the
controller.
• Red LED indicates the device is attempting to connect to
the controller.
On ethernet ports, the right LED displays the link activity. The
LED blinks when there is activity detected on the link.
On ethernet ports, the left LED displays the link speed on the
port.
• Off—No link or speed is 10Mbps.
• Green—Link detected and speed is 100Mbps.
• Yellow—Link detected and speed is 1Gbps.
Cellular ION Device
The device cellular LED indicates the signal strength.
• Off—No modem detected.
32
2023 Palo Alto Networks, Inc.
©