Table of Contents
Advertisement
6.1
Operation
Before First Use
1. Before use, clean the appliance observing indications in section 'Cleaning'.
2. Dry the appliance thoroughly.
Appliance Start-Up
1. Connect the appliance into a mains socket.
2. Switch the safety switch on.
3. Set the required temperature (1–5) for the selected hob, using the relevant
temperature controller.
The orange indicator light lights up and is lit until the power output controller(s) is
(are) set to '0'.
Heating Up / Keeping Food Warm
WARNING!
EN
The food in containers may slid or fall if the appliance is not set on even
and stable surface.
Pay attention to the surface you are putting cookware taken off of the appliance.
Never move the appliance with food on top of it; remove the food first.
Use protective gloves when moving cookware.
1. Place an appropriate cookware with food on the heating plate.
ATTENTION!
Do not place an empty cookware on the hob, as otherwise, this may result
in damage to the appliance and cookware.
2. Rotate the power output controller clockwise to switch the appliance on.
3. Select the required setting, suitable for the processed product.
4. Heat the product up.
20 / 22
Operating Instruction
284142
Advertisement
Table of Contents
