Checking The Oil Level - Ingersoll-Rand GHH RAND SILU CG80 Operating Manual

‣
Tighten the fastening screws (2) on the discharge
silencer (1), tightening one screw then tightening
the screw opposite.
Tightening torque (M12 A2-70): 65 Nm
‣
Reinstall the cover and screw in the oil dipstick.
Tightening torque (M8 A2-70): 18 Nm
4.4.3

Checking the oil level

‣
Unscrew the oil dipstick (1) (unit).
‣
Unscrew the oil dipstick (2) (CG80).
‣
Clean the oil dipstick (1/2) with a lint-free cloth
and screw it back in completely.
‣
Unscrew and remove the oil dipstick (1/2) again
and check the oil level.
NOTE
The oil level must be between the marks "min." and
"max." on the dipstick. The difference between the
markings is approximately 1 litre.
‣
Correct the oil level as needed.
47757778 A
Maintenance/repair
25