Checking The Oil Level - Ingersoll-Rand GHH RAND SILU CS1050 LITE Operating Manual

Maintenance/repair
‣
Tighten the fastening screws (2) on the discharge
silencer (1), tightening one screw then tightening
the screw opposite.
Tightening torque (M12 A2-70): 65 Nm
‣
Reinstall the cover.
Tightening torque (M6 A2-70): 7 Nm
4.4.3

Checking the oil level

‣
Unscrew the oil dipstick (1) (unit).
‣
Unscrew the oil dipstick (2) (CS85).
‣
Clean the oil dipstick (1/2) with a lint‑free cloth
and screw it back in completely.
‣
Unscrew and remove the oil dipstick (1/2) again
and check the oil level.
NOTE
The oil level must be between the marks "min."
and "max." on the dipstick. The difference between
the markings is approximately 1 litre.
‣
Correct the oil level as needed.
26
47757782 A