Cleaning And Replacing The Intake Filter Element; Check The Safety Valve - Ingersoll-Rand GHH RAND SILU CG80 Operating Manual

Maintenance/repair
4.4.4

Cleaning and replacing the intake filter element

For the maintenance or replacement of the intake filter of a compressor unit based on the CG80 com-
pressor stage (third-party manufacturer), only the instructions from the manufacturer are applicable.
NOTE
Intake filters from diverse manufacturers can be installed. Also observe the instructions from the manu-
facturer.
‣
Loosen the star grip nuts (1) on the compressor
unit and then remove the cover (2).
‣
Remove filter elements (3).
‣
Clean filter elements (3) by lightly tapping or
replace if necessary.
NOTICE
INCORRECT FILTER CLEANING!
Do not clean filter elements with compressed air,
benzine or other liquids.
‣
Only clean or replace the filter element accord-
ing to the instructions.
‣
Assembly occurs in reverse order.
4.4.5

Check the safety valve

The safety valve (2) is usually installed on the dis-
charge silencer (1).
NOTE
The discharge silencers (1) supplied by GHH RAND
have an integrated safety valve (2).
26
47757778 A