Transferring Images Via Wireless Lan - Pentax Q7 Operating Manual

Transferring Images via Wireless LAN

You can transfer images to your computer via wireless LAN by
using a memory card with a built-in wireless LAN (Eye-Fi card).
Select the camera action when using
an Eye-Fi card in [Eye-Fi
Communication] of [Eye-Fi] in the D2
menu.
Transfers automatically when images are taken, new
Auto images are saved, or images are overwritten.
Only movies under 2 GB can be transferred.
Transfers images that are selected in playback mode.
Select
Only JPEG and RAW images can be transferred.
Off Turns off the wireless LAN function. (Default setting)
uCaution
• Be sure to set up a wireless LAN access point on a computer
for the Eye-Fi card connection.
• For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images. The
camera may turn off if the internal temperature of the camera
becomes high.
• For precautions on the Eye-Fi card, refer to "About Eye-Fi
Cards" (p.91).
tMemo
• [Eye-Fi] of the D2 menu cannot be selected when an Eye-Fi
card is not inserted.
• When an Eye-Fi card is used, 100 images can be stored in a
D2
• Select [Communication Info] to check the firmware version of
Eye-Fi Eye-Fi
Eye-Fi Communication Eye-Fi Communication
Communication Info Communication Info
You can select the images to transfer.
Automatically transfers Automatically transfers
unsent images from memory card unsent images from memory card
1
Cancel Cancel OK OK
MENU
OK
2
3
4
5
single folder. For RAW+ images, two files are counted as one
image.
the Eye-Fi card.
Transferring Selected Images
Set [Eye-Fi Communication] to [SELECT] in
[Eye-Fi] of D2 menu.
Select e in the playback mode palette.
The screen for selecting a transfer option appears.
Select the desired option and press E.
Select image(s) Up to 100 images can be selected in
one folder.
Select a folder Transfers all images that can be
transferred in the selected folder.
The folder selection screen appears.
Select a folder and press E.
The image selection screen appears.
When [Select a folder] is selected, proceed to Step 7.
Select the image(s) to
transfer.
Images that have already been
transferred and movies cannot
be selected.
5
000/100 000/100 100-0001 100-0001
Cancel Cancel Finish Finish
MENU OK INFO
67