Setting The Ae Metering - Pentax Optio W10 Operating Manual

Setting the AE Metering

You can set the area of the screen where the brightness is metered to
determine the exposure.
4
AE metering
Multi-segment
L
metering
Center-
weighted
M
metering
Spot AE
N
metering
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [AE Metering].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the AE Metering setting.
5
Press the 4 button.
The AE Metering setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
94
MENU
2, 3, 4
5
1, 6
The camera divides the image into 16 areas, meters the
brightness and determines the exposure.
The camera takes a uniform reading of the overall brightness
of the picture with the metering focused at the center of the
image.
The camera determines the exposure by metering the
brightness only at the center of the image.
Rec.Mode
1/3
6
Recorded Pixels
M
Quality Level
AWB White Balance
AE Metering
ISO
Sensitivity
AUTO
Exit Exit Exit
MENU
R C Y B C
Rec.Mode
1/3
6 Recorded Pixels
M
Quality Level
AWB White Balance
AE Metering
ISO
Sensitivity
AUTO
MENU Cancel Cancel Cancel
L
M
N
OK OK OK OK