Selecting Flash Mode - Pentax K10D Operating Manual

72

Selecting Flash Mode

1
Press the { button.
The Fn menu appears.
2
3
Press the four-way controller
(3).
The Flash options screen appears.
• When the mode dial is set to B, C and D can be selected, when set to b,
L, a or p, E, F and I can be selected, and when set to M, E and F
can be selected. For any other mode, E, F, G, H and I can be selected.
• When the mode dial is set to A, the available flash modes vary depending
on the settings that have been saved.
3
Use the four-way controller (45) to choose a flash mode.
When not in B (Green) mode, turn the rear e-dial to perform Flash
Compensation. The compensation range is –2.0 to +1.0.
4
Press the 4 button.
The camera returns to the Fn menu screen.
5
Press the { button.
The camera is ready to take a picture.
Fn
OK
Flash Mode Flash Mode Flash Mode
Flash On Flash On
0 . 0 0 . 0 0 . 0
AUTO AUTO AUTO
Exit Exit Exit
OK
OK OK OK
OK