Selecting The Flash Mode - Pentax R07020 Operating Manual

Hide thumbs Also See for R07020:
Table of Contents

Advertisement

• Some functions may not be available or may not function fully depending
on the selected shooting mode. For details, refer to "Functions Available for
Each Shooting Mode" (p.172).
• The 3 button function varies depending on the screen. Refer to the
guide indications.
MENU
Exit
MENU
MENU
Cancel

Selecting the Flash Mode

,
Auto
Flash Off
a
Flash On
b
c
Auto + Red-eye
Flash On +
d
Red-eye
Macro Light
• The available modes differ depending on the selected shooting mode,
focus mode or drive mode. Refer to "Functions Available for Each Shooting
Mode" (p.172) for details.
• If you use the Face Detection function when , is selected, the flash mode
is automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause
irregularities in the image due to the light distribution.
Exits the menu and returns to the original screen.
Returns to the previous screen with the current settings.
Cancels the current selection, exits the menu and returns
to the previous screen.
The flash discharges automatically depending on the light
conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is
prohibited.
The flash discharges for each shot regardless of the
brightness.
This mode reduces the red-eye phenomenon caused by the
light from the flash being reflected in the subject's eyes. The
flash discharges automatically.
This mode reduces the red-eye phenomenon caused by the
light from the flash being reflected in the subject's eyes. The
flash discharges regardless of the light conditions.
Light is emitted from the LED surrounding the lens.
3
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg-90

Table of Contents