Pentax K10D Operating Manual page 99

Filter name
B&W
Sepia
Color
Soft
Slim
Brightness
When another image is selected with the four-way controller (45), the
image appears in the set filter.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (2)
to select [Save as].
8
Press the 4 button.
The filtered image is saved under a different name.
Function
Converts to a black and white
image. Changes the contrast to
appear as if a B&W color filter
was used.
Adds a vintage touch to photos by
converting them to sepia color.
Selects from three levels of
density.
Adds a color filter to the image.
Selects from 18 filters (6 colors ×
3 tones).
Creates a soft image by lightly
fading the entire image. Selects
from three levels.
Changes the horizontal and
vertical ratio of images. Adjusts
height or width up to two times the
original size.
Changes the brightness of
images. Adjusts in a range of ±8
levels.
Front e-dial Rear e-dial
— BW/R/G/B
Density
—
(3 levels)
Red/Green/
Density of
Blue/Yellow/
each color
Magenta/
(3 levels)
Cyan
Softness
—
(3 levels)
Left: Wide
—
Right: Slim
Left: Dark
—
Right: Light
Save image as a new file Save image as a new file Save image as a new file
Save as
Cancel Cancel Cancel
MENU
97
3
OK OK OK
OK