Attaching The Lens - Pentax K10D Operating Manual

Attaching the Lens

58
All camera exposure modes are available when using DA, D FA, FA J or
other lenses with Aperture s (Auto) position. Some functions are
restricted when lenses are not set to Aperture s (Auto). Also see "Notes
on [Using Aperture Ring]" (p.210). Other lenses and accessories will not
be available with factory default settings. To allow shutter release with
2
lenses or accessories not listed above, set [Using aperture ring] in custom
function settings. (p.35)
Turn the camera off before attaching or removing the lens to prevent
unexpected lens movement.
1
Check that the camera is turned off.
2
Remove the body mount cover
(1) and lens mount cover (2).
Be sure to put the lens down with the
lens mount side facing upward to
protect the lens mount from damage
after removal.
3
Align the red dots on the
camera and the lens, and
secure by turning the lens
clockwise until it clicks.
After attaching, turn the lens
counterclockwise to check that the lens
is locked in place.