Pentax K10D Operating Manual page 220

218
Error Message Description
The batteries are exhausted. Install new
Battery depleted
batteries in the camera. (p.43)
Appears during CCD cleaning if the battery level
Not enough battery
is insufficient. Replace the battery with a new
remaining
one or use an AC adaptor D-AC50 (optional).
to clean sensor
(p.47)
The maximum folder number (999) and file
Image folder cannot number (9999) are being used, and no more
be created images can be saved. Insert a new SD Memory
Card or format the card. (p.188)
The image could not be saved because of an SD
The image is not stored
Memory Card error.
The DPOF settings or rotated image could not
be saved because SD Memory Card is full.
Settings not stored
Delete unwanted images and perform DPOF
settings or rotation again. (p.100)
5
RAW images cannot be set DPOF cannot be applied to the RAW images.
RAW images are RAW images cannot be processed using the
not supported digital filter.
When digital filter is started from [Q Playback]
menu, this message appears if all saved images
No image to be filtered
are RAW files or images captured with other
cameras.
This image cannot be Appears when digital filter is started from Fn
filtered menu for images captured with other cameras.
No file set with DPOF. Set DPOF and then print.
No DPOF files
(p.106)
There is an error with the printer and the file
Printer error cannot be printed. Fix all the errors and try
printing again.
Printer has run out of paper. Put paper in the
No paper in the printer
printer and print.
Printer is running out of ink and appears once
Low ink level in the printer this signal is received from the printer. After two
seconds, the printer resumes printing.
No ink in the printer Printer has run out of ink. Replace ink and print.
Paper is jammed in the printer. Remove paper
Paper stuck in the printer
and print.
Data error A data error has occurred during printing.