Storing User Settings - Pentax K10D Operating Manual

6
Press the 4 button.
The camera returns to the Capture mode.
7
Shoot.
The created picture is displayed in Instant Review each time the shutter
release button is pressed. Press the i button during Instant Review to
discard pictures created to that point and create again from the first picture.
The picture is saved when the set number of shots has been taken.
• If the | button or 3 button is pressed, or the Exposure Bracket is set
during Multi-exposure shooting, the pictures that have already been taken
are saved and Multi-exposure is exited.
• Multi-exposure and Auto Bracket or Extended Bracket cannot be used
together. The mode set afterwards is set.

Storing User Settings

You can store the current camera settings and easily retrieve them simply
by setting the mode dial to A.
The following settings can be stored.
Exposure mode
Flash mode
EV Compensation
Exposure Bracketing Steps & No. of Frames
Drive mode
Flash Exposure Compensation
Extended Bracketing Steps & Type
Sensitivity
Auto Sensitivity Adjustment Range
Store the settings in [USER] in the [R Set-up] menu.
Saves current shooting
settings in USER mode
+ 1 . 3 + 1 . 3 + 1 . 3
- 1 . 0 - 1 . 0 1 . 0
2 0 0 - 1 6 0 0 2 0 0 - 1 6 0 0 2 0 0 - 1 6 0 0
10000K 10000K 10000K G2 A1 G2 A1 G2 A1
RAW+ RAW+ RAW+
10
Cancel
MENU
1 . 0 x 5 1 . 0 x 5 1 . 0 x 5
AE±3 AE±3 AE
OK
OK
White Balance
File Format
JPEG Rec. Pixels
JPEG Quality
Image Tone
Saturation
Sharpness
Contrast
167
4