Problems And Warning Signals - ELNA eXpressive 830L Instruction Book

Problems and Warning Signals

If the visual touch screen shows a warning sign, follow the guidance below.
Warning Sign Cause
The bobbin winder spindle is shifted to the right.
The machine is halting due to overload.
The caution message appears when the lockout
key is pressed while the embroidery hoop is at the
position to disturb threading.
The machine is malfunctioning.
71
Try this
Shift the bobbin winder spindle
to the left for stitching.
Wait for at least 15 seconds to
restart. Remove tangled threads
around take-up lever, hook race
and automatic thread cutting
mechanism.
The embroidery hoop will
temporaly move to a position
to avoid disturbing a threading
when the OK key is pressed.
Contact the service center or the
store from whom the machine
was purchased.