4.2
Mounting on DIN rails
Installation
Figure 4-1
To install the device on a 35 mm DIN rail complying with DIN EN 60715, follow the steps
below:
1. Place the housing guide of the device on the top edge of the DIN rail
2. Press the device down against the DIN rail until the spring catch locks in place
3. Fit the connectors for the power supply, see the section "Connecting up (Page 45)".
4. Insert the terminal blocks into the sockets on the device.
Removal
Figure 4-2
SCALANCE XF-200BA
Operating Instructions, 02/2023, C79000-G8976-C470-08
DIN rail mounting
Removing from a DIN rail
Installation and removal
4.2 Mounting on DIN rails
①
.
②
.
39