Siemens SIMATIC NET SCALANCE XF-200BA Operating Instructions Manual page 16

Recommendations on network security
Service
PROFINET
RADIUS Client
SFTP Server
SMTP Client
SMTP Client (secure)
SNMPv1/v2c
2) 3)
SNMPv3
SNMP Traps
SNTP Client
SSH CLI Server
Syslog Client
Syslog (secure) Client
Telnet 3)
TFTP Client
1) Port number can be configured via the WBM.
2) Read-only access only.
3) Protocol according to Security by Default.
4) The port is closed by default and is displayed when a RADIUS server is configured. Port number can be configured via the WBM.
5) You can find additional information on the encryption methods used in the WBM appendix "Ciphers used".
The following is a list of all available Layer 2 services through which the device can be
accessed.
The table includes the following columns:
• Layer 2 service
The Layer 2 services that the device supports.
• Default status
The default status of the service (open or closed).
• Service configurable
Indicates whether the service can be configured via WBM / CLI.
Layer 2 service
DCP
LLDP
16
Protocol / Port Default port
number status
UDP/34964 Open
UDP/49151 ...
49159
1)
UPD/1812 Outbound only
4)
UPD/1813 4)
UDP/3799 Open
UDP/22 Outbound only
TCP/25 Closed
TCP/465 Closed
UDP/161 Open
UDP/161 Open
UDP/162 Outbound only
UDP/123 Closed
TCP/22 Open
UDP/514 Closed
TCP/6514 Closed
TCP/23 Closed
UDP/69 Outbound only
Configurable Authentication
Port Service
-- ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓ Optional
-- ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Default
status
Setup mode
1)
Open
Operating Instructions, 02/2023, C79000-G8976-C470-08
Encryption
5)
- -
- -
- -
✓ ✓
- -
✓ ✓
- -
Optional
- -
- -
✓ ✓
- -
- ✓
✓ -
- -
Service configura‐
ble
✓
✓
SCALANCE XF-200BA