BINMASTER BINCLOUD BCGW.02LLC-DPM500 Quick Setup Manual

A1
STEP 2
Attach mount brackets to the enclosure
with the included screws. Brackets fit on
protruding screwholes on the back of
the enclosure. Then, use drywall screws
and attach unit to the wall location.
BINCLOUD GATEWAY
Control
room
3
1
2
power
ethernet
STEP 1
Choose a location to mount your Gateway and the antenna. For the Gateway,
make sure there is access to a 120VAC outlet. The antenna should be in a good
line-of-sight to sensors within 20 feet of the Gateway location.
1. Gateway (with cellular antenna, ethernet also an option)
2. Wire through wall to antenna
3. Antenna mounted outside with line of site to sensor (wired to Gateway)
4. Sensor mounted on vessel
QUICK SETUP GUIDE
BCGW.02LLC-DPM500
Tools needed: drill and bit, phillips screwdriver, drywall/
wood screws, ethernet cable, pliers. Screws and plas-
tic plugs, A1, can be used to secure the top cover.
4
laser
sensor