Table of Contents
Advertisement
E31 Series Installation Guide
Installation (cont.)
Z205667-0G
Page 11 of 23
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
2. Mount the adapter boards to either DIN rail or SNAPTRACK.
A. DIN Rail: Use the supplied screws to secure the plastic DIN clips to the adapter board. Affix the clips to the DIN rail (Figure 2).
Figure 2
DIN Option 1: Vertical Mount
DIN Option 2: Horizontal Mount
B. SNAPTRACK: Secure the SNAPTRACK to the mounting surface. Click the adapter board into place (Figure 3).
Figure 3
3. Connect adapter boards to the main board using ribbon cable (Figure 4). Ribbon cables are keyed to ensure proper installation.
Note: Flat and round ribbon cable are available from Veris. See Recommended Accessories.
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
TM
0815
Advertisement
Table of Contents
