I/O Ports Arrangement; Panel Mounting - Advantech TPC-660E User Manual

1.6 I/O Ports Arrangement

The arrangement of the I/O ports is shown in Figure 1.1.

1.7 Panel Mounting

1. There is an adhesive waterproof gasket on the front bezel. Make
sure the waterproof gasket is in position before installing TPC-
660E into the panel opening.
2. Install the TPC-660E into the panel opening.
3. Find the six clampers and six long screws in the accessory pack.
Hook the clampers to the holes around the four sides of the bezel.
Insert the screws into every clamper and fasten them. These screws
will push the mounting panel and fix the unit.
4. The suggested mounting panel thickness is less than 6 mm
(0.236").
Figure 1.1: I/O Port Arrangement
5 Chapter 1