Humlog 10 Thc With Internal Sensors/Without Display - E+E Elektronik HUMLOG 10 Manual

Manual HUMLOG 10

5 HUMLOG 10 THC with Internal Sensors/without Display

General: the hardware of the HUMLOG10 compact is almost identical to the
hardware of the HUMLOG10 with display. Two LEDs (a red and a green one) are
used as a sub-stitute for the display to indicate the operation mode and the alarm.
In addition, you will find close to the serial interface a start / stop button to switch on
/ off the datalogger.
Operation mode / Alarm
Serial interface
Start-/ Stop button
Page 9 of 17