E+E Elektronik HUMLOG 10 Manual page 10

Manual HUMLOG 10
Start/Stop function: the off / on button enables the HUMLOG10 to start and stop
recording. The manual activation / deactivation of the datalogger and the
configuration in start/stop or in ring mode are independent.. By pressing the off / on
button, the HUMLOG10 will start recording ; by pressing it again, the HUMLOG10
will stop etc...
Important: In the start / stop mode, the HUMLOG10 will start recording from the
start date on (provided that this date is set in the HUMLOG) no matter if the start /
stop button is being pressed during this time.
Before the HUMLOG starts recording, it can be activated or deactivated too via the
on / off button (s. timing diagram).
Button On
Button Off
Logger On
Logger Off
LED Green
LED Red
Timing Diagram: HUMLOG 10 THC in ring mode
Page 10 of 17