Mounting The Humlog - E+E Elektronik HUMLOG 10 Manual

Manual HUMLOG 10

8 Mounting the HUMLOG 10

The HUMLOG 10 can be used as a mobile and stationary data acquisition system.
For stationary applications the HUMLOG 10 may only be mounted on a flat surface.
In order to do this, please first remove the Sensor Module (see Changing the Sensor
Module).
Two holes for wall mounting are provided in the guide rail of the Display Module.
Use these to mount the Display Module. Next carefully join the two modules
together until they engage.
Illustration: Mounting the HUMLOG 10
Page 15 of 17