E+E Elektronik HUMLOG 10 Manual page 5

Manual HUMLOG 10
Explanations concerning the Display operation:
When a pre-set limit has been exceeded the alarm symbol of the corresponding
channel flashes. Once an alarm has been recognised, the alarm symbol remains
visible on screen in static form even if the limit is no longer exceeded. The alarm
message can only be eliminated by selecting "Memory Readout" on the PC.
If the Pre-Selection mode (start flag) was selected, the start -date and start-time for
data recording are shown on the Date/Time display. Once the pre -set date/time has
been reached the start flag is elim inated, the real time clock display becomes active
and data recording begins.
The units m/s (Channel 1) and ppm / hPa (Channel 2) are reserved for other options.
The special functions are reserved for other options.
Page 5 of 17