Humlog 10 Tse For External Sensors - E+E Elektronik HUMLOG 10 Manual

Manual HUMLOG 10

4 HUMLOG 10 TSE for External Sensors

The connectors for the external sensors, the corresponding sensor adapters and the
serial interface (RS232) are located on this module.
Illustration: Module for External Sensors
Either one or two temperature sensors or one to two combined
temperature/humidity sensors can be connected here. (Two sensors are only
available in connection with the Professional version of SmartGraph 2.
If only one external sensor is used this is connected to the left hand sensor socket.
In order that the instrument may correctly recognise the association of the sensors
to the channels, both sensor socket positions must first be unoccupied. If a sensor
is connected to one of the two sockets, the indication UPLG (Unplug) appears in the
corresponding line (Line 1= left hand socket, Line 2= right hand socket).
Page 7 of 17