oventrop 168 07 06 Installation And Operating Instructions

Before initial operation, please examine condition and
function of system components, control, emergency tripping
and safety devices and check them for damages! Operating
instructions are to be read!
Content
1. General information ______________________________ 1
1.1. Information regarding operating instructions___________ 1
1.2. Symbol explanation ______________________________ 1
1.3. Copyright ______________________________________ 1
2. Safety__________________________________________ 2
2.1. Correct use ____________________________________ 2
2.2. Possible dangers at the installation__________________ 2
3. Transport, packaging und storage __________________ 2
3.1. Transport inspection _____________________________ 2
3.2. Storage _______________________________________ 2
4. Technical data __________________________________ 2
4.1. Performance data _______________________________ 2
5. Construction and function ________________________ 3
5.1. Functional description ____________________________ 3
6. Installation and assembly _________________________ 3
6.1. Installation of the two-way valve with actuator _________ 3
6.2. Removing the actuator for installation________________ 3
6.3. Leakage test ___________________________________ 3
7. Operation ______________________________________ 3
7.1. Automatic Mode ________________________________ 3
7.2. Manual Mode___________________________________ 3
Oventrop Corp.
P.O. Box 789
29 Kripes Road
East Granby, CT 06026
Phone (860) 4 13 91 73
Telefax (860) 4 13 94 36
E-Mail: usa@oventrop.com
Internet: http://www.oventrop-na.com
Valves, controls + systems
Installation and operating instructions for a specialised installer
1. General information
1.1. Information regarding operating instructions
These operating instructions help the user to install, put into
operation and service the two-way valve with actuator.
Before starting work, the operation instructions and especially the
chapter „Safety" are to be read in their entirely! The operating
instructions and especially the safety notes as well as the
regulations for prevention of accidents must be observed.
1.2. Symbol explanation
Guidelines for the safety of persons and the installation itself are
displayed by symbols. These guidelines must be observed in order
to avoid accidents and damage property.
DANGER!
Imminent danger to life and limb!
Attention!
Possible danger to product and environment!
Note!
Useful Information and notes.
1.3. Copyright
The operationg instructions as well as the included texts, drawings,
images and other illustrations are copyrighted. Duplication of any
kind – even in extracts – as awell as the exploit and/or passing-on
of the contecnt are not permitted without the written declaration of
censent of the manufacturer. Damages will be claimed for in case
of contraventions. Subject to further claims.
Subject to technical modifications without notice.
Two-Way valve with actuator 24V
1