Charging The Battery Pack - Sanyo Xacti VPC-C5 Instruction Manual

CHARGING THE BATTERY PACK

The battery pack is not charged at the time of purchase and therefore needs
to be charged before use. In addition, if the battery charge becomes low while
you are using the camera, it is recommended to recharge it as soon as
possible.
1
Connect the AC adaptor/charger
to a power outlet.
h Use the supplied power cord for
connecting.
2
Insert the battery pack into the AC
adaptor/charger.
h Set it in the battery slot.
h Be sure the battery pack is
correctly oriented when setting it
in the charger.
h Charging begins. During
charging, the CHARGE indicator
lights red.
h When the battery pack is
completely charged, the
CHARGE indicator turns off.
h Charging will take approximately
90 minutes.
3
When the battery pack is fully
charged, remove it from the AC
adaptor/charger.
h After removing the battery pack,
unplug the power cord from the
power outlet.
35
English
To power outlet
CHARGE
indicator